⚡ Ford Focus Tail Lights Not Working

3,218 Answers. The brake lights/signal lights/hazard light circuit all run through the signal light/multi-function switch. You can try gently moving the switch slightly up or down to see if the signals may light up or blink. These switches are common for failure. Posted on Aug 03, 2015. Sue Frampton Aug 03, 2015. As far as I know there has always only been one reverse bulb on the Focus, my dads MK1 did and from what I can see on photos of other cars on Autotrader it's the same for your year of car. turn your ignition on, but don't start the car and put it in to reverse and them check the light(s). Have done some testing and fixes. 1994 E350 7.3 Uhaul Van. Issue: REAR Running Lights are not working. I had this issue "fixed" last week. Some useful info: (before it was "fixed") The headlight/running light switch/**** has always given me problems. But I thought it was just the inside cab dimmer light that was a problem, so I ignored it. Ford Focus tail lights not working I've got the exact same problem on my Ford Focus. Reading the above replies, i've opened and cleaned the tail light units,and checked all the fittings and bulbs are where they are meant to be. Unfortunately it hasnt helped and now my right rear break light isn't working either. Recommended Services. The stop lamp fuse is in the left kick panel inside the vehicle. It is a 15amp fuse that powers the stop light switch on the brake pedal. The brake light switch sends power to rear brake lights. The statements expressed above are only for informational purposes and should be independently verified. 2. Passenger side - fitted with a twin filament bulb for the rear brakes light and rear lamps/lights (when the headlights are on). The rear brake filament works files (both drivers and passenger side light up). when the headlights are on only the drivers side rear lamp/light works. I've bought new bulbs and swap them all around between the two Tail lights and brake lights are part of one assembly, and many vehicles use the same bulb for both. However, they don’t serve the same purpose. Tail lights illuminate as soon as the headlights are on. Meanwhile, the brake lights are only activated whenever the driver steps on the brake pedal. The front and rear parking lights are on the same circuit, so first, check to see if the front parking lights are working. If the parking lights are not working with the headlight switch in the on position, then locate fuse number 22 in the fuse micro panel on the right front interior kick panel. This fuse will power the parking light relay PBS9EyJ.

ford focus tail lights not working